Chapter 2 Installation; Requirements; Procedure - Planex BLW-54MR User Manual

Chapter 2
Installation
This Chapter covers the physical installation of the Wireless Router.

Requirements

" Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
"
TCP/IP protocol must be installed on all PCs.
"
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable
modem (for WAN port usage)
"
To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11b or IEEE802.11g specifications.

Procedure

1. Choose an Installation Site
Select a suitable place on the network to install the Wireless Router.
Ensure the Wireless Router and the DSL/Cable modem are powered OFF.
Figure 4: Installation Diagram
2
6