Installer Telephone Menu - Bosch Easy Series ICP-EZM2 Quick Start Manual

12 en | Installer Telephone Menu
6

Installer Telephone Menu

1.
2.
3.
Set date and time
1
2 Full system test
Installer
Passcode
3 System test menu
4
Event history
1
System
Reset system
5
Maintenance
Wireless configuration
6
# Exit
1 Change installer passcode
2 Change master user (User 1) passcode
2
User Menu
# Exit user menu
1 Points
3
2 Report
Basic
configuration
Programming
3 Outputs
4 Country code
# Exit
4
Enter programming item, enter selection.
Expert
Programming
1 Talk to person at control center
2
5
# Exit
Two-Way
Voice Session
6
Custom
Messages
1 Send data from key to control panel
2 Send data from control panel to key
7
# Exit
Programming
Key
# Exit
2014.09 | 01 | F.01U.306.216
Connect to the phone test posts or use the house phone.
Hold down the test button for 10 seconds.
Enter the Master Passcode default 1234(55).
1
Most recent events
2
Events by date
3
Last alarm event
4
Last 10 events
#
Exit
1 Record point description
2 Set point type
# Exit
1 Select output function
# Exit
Listen to person at control center
1 Record site description
2 Record Call for Service message
# Exit
+
1 Warning device test
2 Battery test
3 Communication test
4 Control center test
5 Point test
6 Operate Outputs
# Exit
1 Set point type
2 Add a device
3
Replace a device
4 Delete a device
7 Expert diagnostic menu
# Exit
1
Enter account number
2 Configure report destinations
3 Remote programming success
# Exit
Quick Start Guide
Easy Series Control Panel
1 Signal level summary
2 Messages and packets received
3 Signal level in percentage
4 Filtered ambient signal level in percentage
5 Realtime ambient signal level in percentage
# Exit
Bosch Security Systems, Inc.