Bosch Easy Series ICP-EZM2 Quick Start Manual page 9

Easy Series Control Panel
2.
3.
4.
When setting up an Easy Series control panel to use RADION transmitters, only select from the
RPS device types listed in the table below.
RPS device type
PIR motion detector
Dual motion detector
Wireless device type 3
Smoke detector
Door Window contact sensor
Glass break sensor
Wireless Recessed Point
Wireless Bill Clip
Mini-Door-Window contact
Notice!
Do not use any other RPS device types when specifying RADION transmitter configurations.
The columns labeled "Wireless Sensor Sensitivity" and "External Power Input" have no effect
on the Radion Wireless Receiver/Transmitter configuration. These fields are not used by the
Easy Panel Radion configuration.
Bosch Security Systems, Inc.
Enter the RFID for the point as specified in the product packaging.
Select the desired Point Type from the drop-down menu.
Enter an appropriate value in the Wireless Alarm Inputs column.
RADION transmitter
PIR detector (RFPR-12)
PIR curtain detector (RFPR-
C12)
Motion detector (RFDL-11)
Repeater (RFRP)
Smoke detector (RFSM)
Universal transmitter (RFUN)
Glassbreak detector (RFGB)
Recessed door/window
contact (RFDW-RM)
Bill trap (RFBT)
Door/window contact (RFDW-
SM)
Quick Start Guide
Configure the System | en
Wireless alarm inputs
Motion
Motion
None
Smoke
Wired or magnet
Glass break
Magnet
Magnet
Magnetic
2014.09 | 01 | F.01U.306.216
9