Removing And Inserting The Memory Card - Kodak DC265 User Manual

Removing and inserting the memory card

Although your camera can't take pictures without the memory card, you can
remove the card to use in another camera or to place in your computer.
To remove the memory card:
To insert the memory card:
1 Open the memory card door.
2
Insert the memory card so that the:
pin-connector edge of the card enters the camera first
small lip on the memory card is toward the front of the camera
3
Close the door.
For a more information on the memory card, refer to "Placing the
memory card in your computer" on page 7-8.
1
Open the memory card door.
2
Flip the memory card Release button so it
protrudes out from the side of the camera.
WARNING: Do not press the Release button if
the red LED under the button is on
or blinking. Ejecting the card
while this LED is on can result in
the loss of all data on the card.
3
Press Release to release the memory card from
the camera.
4 Pull the memory card out of the camera.
2
2-11