Voip Interface Per Application Type - AudioCodes MediaPack MP-118 User Manual

User's Manual
2. VLANS are not required and the Native VLAN ID is irrelevant. Class of Service
parameters may have default values.
3. IP Routing table: Two routes are configured for directing traffic for subnet
201.201.0.0/16 to 192.168.0.2, and all traffic for subnet 202.202.0.0/16 to 192.168.0.3:
Destination IP
Address
201.201.0.0
202.202.0.0
4. The NTP applications remain with their default application types.

11.2.4.2 VoIP Interface per Application Type

This example describes the configuration of three VoIP interfaces; one for each application
type:
1. Multiple Interface table: Configured with three interfaces, each for a different
application type, i.e., one for OAMP, one for Call Control, and one for RTP Media, and
each with a different VLAN ID and default gateway:
Table 11-4: Example of VoIP Interfaces per Application Type in Multiple Interface Table
Application
Index
Type
0 OAMP
1 Control
2 Media
2. VLANs are required and the Native VLAN ID is the same VLAN ID as the
Management interface (configured for Index 0):
•
'VLAN Mode' is set to Enable.
•
'Native VLAN ID' field is set to "1".
3. IP Routing table: A routing rule is required to allow remote management from a host
in 176.85.49.0 / 24:
Destination IP
Address
176.85.49.0
4. All other parameters are set to their respective default values. The NTP application
remains with its default application types.
Version 6.6
Table 11-3: Example of IP Routing Table
Prefix Length
16
16
Prefix
IP Address
Length
192.168.85.14 16
200.200.85.14 24
211.211.85.14 24
Table 11-5: Example IP Routing Table
Prefix Length
24
113
Gateway IP Address
192.168.0.2
192.168.0.3
Gateway
0.0.0.0
200.200.85.1
211.211.85.1
Gateway IP
Address
192.168.0.1
11. Network
Metric
1
1
VLAN
Interface Name
ID
1 ManagementIF
200 myControlIF
211 myMediaIF
Interface
Metric
Name
1 -
MP-11x & MP-124