Multiple Interface Table Configuration Rules - AudioCodes MediaPack MP-118 User Manual

Mediapack series analog voip media gateways
Hide thumbs Also See for MediaPack MP-118:
Table of Contents

Advertisement

User's Manual

11.2.2 Multiple Interface Table Configuration Rules

The Multiple Interface table configuration must adhere to the following rules:
Each interface must have its own subnet. Configuring two interfaces with addresses in
the same subnet (e.g., 192.168.0.1/16 and 192.168.100.1/16) is invalid.
Subnets of different interfaces must not overlap (i.e. 10.0.0.1/8 and 10.50.10.1/24 is
invalid); each interface must have its own address space.
Each interface must be assigned a unique IP address (i.e., two interfaces may not
share the same address space, or even part of it).
The prefix length replaces the dotted-decimal subnet mask presentation and must
have a value of 0-30 for IPv4 addresses.
Only one OAMP interface must be configured and this must be an IPv4 address. This
OAMP interface can be combined with Media and Control.
At least one Control interface must be configured with an IPv4 address.
At least one Media interface must be configured with an IPv4 address.
The network interface types can be combined:
Example 1:
Example 2:
Example 3:
Each network interface can be configured with a Default Gateway. The address of the
Default Gateway must be in the same subnet as the associated interface. Additional
static routing rules can be configured in the IP Routing table.
The interface name must be configured (mandatory) and unique for each interface,
and can include up to 16 characters.
For IPv4 addresses, the 'Interface Mode' column must be set to IPv4 Manual (numeric
value 10).
Each network interface must be assigned a unique VLAN ID.
When configuring more than one IP interface of the same address family, VLANs must
be enabled.
For network configuration to take effect, you must save the configuration to the
device's flash memory (burn) with a device reset.
Version 6.6
One combined OAMP-Media-Control interface with an IPv4 address
One OAMP interface with an IPv4 address
One or more Control interfaces with IPv4 addresses
One or more Media interfaces with IPv4 interfaces (with VLANs)
One combined OAMP-Media interface with an IPv4 address
One or more combined Media-Control interfaces with IPv4 addresses.
111
11. Network
MP-11x & MP-124

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediapack mp-114Mediapack mp-112Mp-124Mediapack mp-124

Table of Contents