The oven is designed to operate on a Standard
120 VAC, 60 Hz household outlet. Be sure the circuit is
at least 15 or 20 A and the microwave oven is the only
appliance on the circuit. It is not designed for 50 Hz or
any circuit other than a 120 VAC, 60 Hz circuit.
· Electrical Rating of the Oven: 120 VAC, 60 Hz
Before cleaning the oven, unplug the power supply cord.
If impossible, open the oven door to prevent an accidental
Inside of the Oven
Use a damp cloth to wipe out crumbs and spillovers. It is
important to keep the area between door and cavity front
clean to assure a tight seal. Remove greasy spatters
with a sudsy cloth, then rinse and dry. Do not use harsh
detergent or abrasive cleaners.
The glass tray can be washed by hand or in the
Wipe with a damp cloth followed immediately by a dry
cloth. The Child Lock feature is also useful when
cleaning the control panel. Child Lock prevents
accidental programming when wiping the control panel
(if so equipped).
If steam accumulates inside or around the outside of the
oven door, wipe the panel with a soft cloth. This may
occur when the microwave oven is operated under high
humidity conditions and in no way indicates a
malfunction of the unit.
Outside Oven Surface
Clean with damp cloth. To prevent damage to the
operating parts inside the oven, the water should not be
allowed to seep into the ventilation openings.
After cleaning the oven, be sure that the rotating ring
and the glass tray are in the right position. Press the
STOP/ CLEAR pad twice to reset any accidental key
This appliance must be grounded. If an electrical short
circuit occurs, grounding reduces the risk of electric
shock by providing an escape wire for the electric
current. The cord for this appliance has a grounding wire
with a grounding plug. Put the plug into an outlet that is
properly installed and grounded.
To avoid risk of electric shock, personal injury or death,
use grounding plug properly.
Ask a qualified electrician if you do not understand the
grounding instructions or if you wonder whether the
appliance is properly grounded.
Keep the electrical power cord dry and do not pinch or
crush it in any way.
Properly Polarized and
Three-Pronged (Grounding) Plug
For a permanently connected appliance: This appliance
must be connected to a grounded, metallic, permanent
wiring system, or an equipment grounding conductor
should be run with the circuit conductors and connected
to the equipment grounding terminal or lead on the
©2005 Maytag Services