Electrical Requirements; Parts And Features - Maytag MMW9730AS Use & Care Manual

Observe all governing codes and ordinances. The microwave
oven is connected to both 120-volt sides of the 208/240-volt
circuit required for electrical connections. If the incoming voltage
to the microwave oven is less than 120 volts, cooking times may
be longer. Have a qualified electrician check your electrical
system.
This device complies with Part 18 of the FCC Rules.
This device complies with Industry Canada ICES-001.
This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and
appearances of the features shown here may not match those of your model.
A
B
C
D
E
F

Electrical Requirements

PARTS AND FEATURES

A. Electronic oven control
B. Light
C. Turntable
D. Metal shielded window
E. Lower oven (on combination models.
See separate Use and Care Guide.)
GROUNDING INSTRUCTIONS
For a permanently connected microwave oven:
The microwave oven must be connected to a grounded,
metallic, permanent wiring system, or an equipment
grounding conductor should be run with the circuit
conductors and connected to the equipment grounding
terminal or lead on the microwave oven.
SAVE THESE INSTRUCTIONS
G
F. Bottom vent
G. Door switch
H. Model and serial number plate
I. Dual microwave emission
H
I
5