Maintenance; Disposal - Siemens CCMC1315-LP Configuration

11

Maintenance

12

Disposal

Building Technologies
Fire Safety & Security Products
The camera is maintenance-free. Small amounts of dirt or dust can be cleaned
from the camera using a clean soft cloth.
Do not touch the lens area. Use a soft cloth moistened with alcohol to clean the
surface if it is touched accidentally.
Defective modules should be sent to the nearest Siemens office to be
forwarded to the service centre.
All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
This crossed-out wheeled bin symbol on the product means the
product is covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance
will help prevent potential negative consequences for the
environment and human health. It is a precondition for reuse and
recycling of used electrical and electronic equipment. For more
detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where
you purchased the product.
Maintenance
CCMx1315-LP Configuration Manual EN
05.05.2009
61