Download  Print this page

Siemens CCMC1315-LP Configuration Page 38

1/3” 1.3 mp colour ip camera.
Hide thumbs

Advertisement

Configuration
38
Building Technologies
Fire Safety & Security Products
Motion
ON: Activates motion/activity detection function.
Detection
OFF: Deactivates motion/activity detection function.
Area
1. Click Set Motion Area.
The motion setup screen will open.
2. Select the detection area by clicking/dragging the mouse.
Sensitivity
High: An alarm will be triggered even when minor changes in brightness
occur within the defined area.
Mid: Intermediate between High and Low.
Low: An alarm will be triggered only when major changes in brightness
occur within the defined area.
Text Enable
Select ON or OFF to define whether an additional alarm text defined in
the text field is to be overlaid on the video image. See page.
Text
Define an individual text for alarm overlay.
Audio Output
Select ON or OFF to define whether an additional audio message
(*.wav), pre-recorded on the SD card, is to be output via the Audio out
connector.
Event
Pre-recorded voice files with extension .wav that have been uploaded to
the SD memory card in advance can be selected as voice alarm
messages. Max. 4 different audio sources can be selected.
Alarm mode
OFF: Alarm out disabled
Event: When alarm input 1 or alarm input 2 is triggered or motion is
CCMx1315-LP Configuration Manual EN
05.05.2009

Advertisement

   Also See for Siemens CCMC1315-LP

   Related Manuals for Siemens CCMC1315-LP

This manual also for:

Ccms1315-lp

Comments to this Manuals

Symbols: 0
Latest comments: