Fire Safety & Security Products
Recording by Alarm or Motion
Select the recording format : JPEG or MPEG4.
Set the number of images to be recorded immediately after an alarm
Recording Cycle Set a time interval for alarm recording.
If MPEG4 is selected, the recording time can be set.
In the transfer image section, the file name assigned by the FTP server
is time stamp based. This means that the record file name will be
formatted with the desired file name, time and date. You can enter the
file name or leave it blank.
Enter the data path where the data to be stored on the server.
1. Select Record > SD Recording.
2. Configure the options as described in the table below.
3. Press Save.
CCMx1315-LP Configuration Manual EN