Back Focus; Remote; Temperature - Siemens CCMC1315-LP Configuration

9.10.4

Back Focus

9.10.5

Remote

9.10.6

Temperature

Building Technologies
Fire Safety & Security Products
Network Camera Click Reboot.. The confirmation message will be displayed. Click OK
Reboot to reboot the network camera.
1. Select System > Back Focus.
2. Click the Adjust button.
The lens iris will be fully opened, a live picture screen will pop up, and
brightness will automatically be set to optimum for setting up the back focus.
3. Adjust the lens back focus.
4. Click the Close button to exit the live picture screen.
1. Select System > Remote.
2. Set the baud rate and address of the telemetry device which you want to
control via the RS485 port.
3. Click Save.
1. Select System > Temperature.
2. Configure the options as described in the table below.
3. Click Save.
Display Type Select the desired temperature scale (C=Celsius, F=Fahrenheit)
Temperature The internal temperature of the camera is displayed in the selected
temperature scale.
Temp. If a temperature notification interval has been set an e-mail will be
Configuration
CCMx1315-LP Configuration Manual EN
05.05.2009
57