Fire Safety & Security Products
3. Click Upload.
Rebooting the camera after a firmware update may take approx. 15 minutes.
Camera configuration information can be exported and saved to a personal
computer. It can also be imported from the personal computer to network cameras.
1. Select System > Configuration.
2. Perform the actions as described in the table below.
Click Import and select the configuration file to start importing the
settings to your network camera.
Click Export and choose a file directory to save the configuration
settings on your computer.
Set to Factory
Clicking the Default button will reset the camera settings to the
factory default values.
NOTE: Basic settings of the IP camera such as the network IP
address and the camera name will not be reset.
CCMx1315-LP Configuration Manual EN