Download  Print this page

Installing The Camera; Sd Memory Card; Concept Of The Network Camera - Siemens CCMC1315-LP Configuration

1/3” 1.3 mp colour ip camera.
Hide thumbs

Advertisement

7

Installing the camera

7.1

SD Memory Card

7.2

Concept of the Network Camera

Building Technologies
Fire Safety & Security Products
Please install the SD memory card before switching on the camera as the system
can not detect the insertion of an SD card during operation.
There is a limit to the number of rewrites that are possible with the SD memory
card. Replacing the SD memory card when performing periodic maintenance of
the camera is recommended.
The camera supports the following SD memory cards. Do not use memory
cards with other specifications. SD memory card: 64, 128, 256, and 512 MB, 1
or 2 GB SD memory cards (3.3 V) supported.
Images may not be recorded or read correctly if an unsupported SD memory
card is used with the camera.
Carefully read the manual, precautions on use, and any other information
supplied with a purchased memory card.
Do not use a memory card containing the data recorded by another device with
the camera as this may result in the camera not functioning correctly.
Do not modify, overwrite the data, or change the folder name of an SD memory
card as this may result in the camera not functioning correctly.
Data recorded with the camera do not comply with the image file format Exit
and the DCF standard. If the SD memory card is to be removed to play images,
use a personal computer to play the images. Other devices may not be capable
of doing so.
The camera can be used in various indoor environments.
It can deliver video images and audio in real time using the Internet or an intranet.
The camera is equipped with Ethernet (RJ-45) 10BASE-T/100BASE-TX network
interfaces.
Ethernet
PC
Hub
CCMx1315-LP Configuration Manual EN
Installing the camera
13
05.05.2009

Advertisement

   Also See for Siemens CCMC1315-LP

   Related Manuals for Siemens CCMC1315-LP

This manual also for:

Ccms1315-lp

Comments to this Manuals

Symbols: 0
Latest comments: