Fire Safety & Security Products
When set to ON, the camera can be detected automatically by the PC. It
is not necessary to install the IpFinder program.
Audio Output Use
When set to ON, a voice message of the camera's IP address can be
delivered to an external speaker via the audio output port.
Bandwidth Control Port
OFF: The network camera will stream images at the maximum frame
rate allowed by the network.
ON: The network camera will display images up to the set bandwidth;
using a lower bandwidth results in lower frame rates.
This function is available when registering with the DDNS provider. To transmit the
camera's host name to a DHCP server you have to configure this in the following
1. Select Network Settings > DDNS.
2. Configure the options as described in the table below.
3. Click Save.
Select ON to enable the DDNS function.
Select your DDNS server (DnyDNS or DHS).
Enter the host name.
Enter the domain name.
CCMx1315-LP Configuration Manual EN