Fire Safety & Security Products
OFF: The IP address filter function is deactivated.
Allowed: All the IP addresses enabled in the list are allowed to access the
Denied: All the IP addresses enabled in the list shall be rejected by the
Enter the IP addresses which are to be processed by the firewall system
into the IP address field. Up to 10 addresses can be set.
Enable the IP address which is going to be processed by the firewall filter.
All the ports listed and enabled in this section will be forbidden to pass the firewall.
1. Select Firewall > Forbidden Ports.
2. Enter the port number and click Enable to have this port rejected by the
3. Click Save.
CCMx1315-LP Configuration Manual EN