Installing the camera
Setting Network Camera Environment
Connecting the Camera and PC by Network
Fire Safety & Security Products
Equipment required for a network camera monitoring system:
Administrator's personal computer
The personal computer that is given all authorities for setting, operating,
monitoring and other functions with the network camera is called the
"administrator's personal computer" in this manual.
Recommended personal computer operating conditions
‒ Operating system: Windows Vista or XP
‒ Internet Explorer Version 6.0 or later
‒ CPU: Intel Pentium 4.2 GHz or higher
‒ Memory: 512 MB or more
Please purchase the required and appropriate number of cameras
corresponding to the desired camera installation locations.
Connection equipment such as a hub and router suiting the network system
environment and LAN cable, a Cat 5e LAN cable is recommended.
Camera search application Web-Cam IP Manager (See also page [
Install this application from the Utilities CD supplied as an accessory.
‒ Install the Web-Cam IP Manager Version 2.0 (Web IP Manager.exe) if all
the units are located in the same network segment.
‒ Install the Web-Cam IP Manager Version 3.0 (IPFinder.exe) if the units are
not located in the same network segment.
To connect to the network, the administrator needs to set the network camera IP
address. There are two options for setting the IP address:
Entering the IP address manually (factory default)
Your camera is set to this mode at the factory with the IP address:
192.168.0.10, so you need to enter this IP number manually to access the
camera for the first time.
Obtaining an IP address automatically from the DHCP server
If your network uses a DHCP server, you do not need to change the IP address
of the camera. But be sure to set DHCP ON/OFF to ON in "Network
CCMx1315-LP Configuration Manual EN