Chapter 4: Translating the IPSIs
These steps are done by issuing SAT commands on a terminal emulation program such as
Avaya Native Configuration Manager, Avaya Terminal Emulation, or HyperTerminal. You also
can use Avaya Site Administration, part of the Avaya Integrated Management suite, which you
can purchase from Avaya.
Note:
You must use Release 2.1, update 1, or a later version of Avaya Site
Note:
Administration to administer new features in Release 3.0 of Avaya
Communication Manager.
Perform these tasks to customize the media server:
Starting terminal emulation
●
Inputting translations
●
Resetting the media server
●
Adding media gateways
●
Administering the IPSIs
●
Starting terminal emulation
Note:
Avaya Native Configuration Manager, Avaya Terminal Emulation, and
Note:
HyperTerminal are supported terminal emulation applications.
These steps start terminal emulation.
1. On the services laptop, open a VT-100 terminal emulation session.
2. Administer the terminal emulation port settings:
9600 baud
●
No parity
●
8 data bits
●
1 stop bit
●
No flow control
●
5023 for the port
●
3. Log into the media server as craft.
on page 59
on page 60
on page 60
on page 60
on page 62
Issue 3.1 June 2005
59