Configuring The Media Server; Opening The Maintenance Web Interface - Avaya S8500 Installing And Configuring

Configuring the media server

After installing the Communication Manager software, you must configure the media server
using the Avaya Installation Wizard.
This section covers the following tasks:

Opening the Maintenance Web Interface

●
Copying files to the media server
●
Enabling Network Time Servers
●
Using the Installation Wizard
●
Verifying media server connection to the customer's LAN (if provided)
●
Configuring the modem
●
Checking LED activity on the optional dual NIC
●
Disconnecting from the media server
●
Note:
Make sure you have the filled-out Electronic Preinstallation Worksheet (EPW)
Note:
before beginning this process.
Note:
Make sure your networking and Web browser settings are correct. See
Note:
configuration
Opening the Maintenance Web Interface
You can use the Maintenance Web Interface to copy files from the Services laptop to the S8500
media server, and perform other configuration tasks.
To access the media server and open the Maintenance Web Interface:
1. Launch a Web browser.
2. In the Address field, type 192.11.13.6 and press Enter to bring up the login Web page.
Note:
The first time you attempt to log in, you get a Web page asking you to install a
Note:
security certificate. Follow the instructions for your particular browser to accept
the certificate. You can also install the certificate on your services laptop
computer by following the instructions in your browser's online help.
3. Log in as craft and use the initial craft password.
44 Installing and Configuring the Avaya S8500 Media Server
on page 45
on page 46
on page 48
on page 52
on page 54
on page 107, of Appendix A: Accessing the media
on page 44
on page 53
on page 50
Network
server.