Cisco 880 Series Voice And Data Routers - Cisco 880 Series Hardware Installation Manual

Cisco 880 Series ISRs
Figure 1-11
antennas on the back panel. However, the feature locations are similar across all Cisco 880 series data
routers.
Figure 1-11 Back Panel of the Cisco 888W Data Router
1
2
3
4
5
1. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected
2. Depending on the router model, the primary WAN port can be G.SHDSL, VDSLoPOTS, or 10/100 FE. The VDSLoPOTS

Cisco 880 Series Voice and Data Routers

The Cisco 880 series voice and data routers provide both voice and data ports. The voice ports managed
voice services that interface with Foreign Exchange Station (FXS), Foreign Exchange Office (FXO), or
BRI connections.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-14
shows the back panel details of the Cisco 888W data router. Nonwireless routers do not have
1
ISDN port—not available on 3G models
2
Primary WAN port —G.SHDSL,
VDSLoPOTS, ADSLoPOTS, ADSLoISDN,
or 10/100 FE
Antenna—captive omnidirectional dipole
WLAN antenna (wireless models only)
4-port 10/100 Ethernet switch
Serial port—console or auxiliary
to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install it to enable the
PoE function.
port is in the same location as the G.SHDSL port. The 10/100 FE WAN port is located at the bottom left corner. See
for the location of the 10/100 FE WAN port.
2 3
6
PoE power connector for optional PoE
module
7 Reset button
8
Power connector
9
Earth ground connection
10 Kensington security slot
Chapter 1
4 5 6 7 8
1
Product Overview
9 10
Figure 1-2
OL-16215-12