Setting The Port - Samsung SDS-P3042 Quick Start Manual

All-in-one security system
Hide thumbs Also See for SDS-P3042:
Table of Contents

Advertisement

Setting the
Port
1. Use the up/down buttons (▲▼) in <Network> window to
move to <Connection Mode>, and press [ENTER]
button.
2. Select <Port>.
3. Use direction buttons (▲▼◄ ►) to move to a desired
item, and set the value.
Protocol Type : Select the protocol type between TCP and
UDP.
- TCP : If compared to UDP, TCP connection is more stable
but slow. Recommended for Internet connection.
- UDP : If compared to TCP, UDP connection is less stable but fast. Recommended for use in LAN
environment.
If selected UDP, selections of
If setting the connection mode to PPPoE, you cannot select UDP for the protocol type.
Device Port
: Initially, <4520~4524> is set. It increases / decreases by 5.
- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet
environments.
UDP Port
: Initially, <8000~8160> is set. It increases / decreases by 160.
Unicast/Multicast : Select one between
If selected Multicast, Multicast IP and TTL are activated.
- UDP- Unicast : Transfers data packet to an individual client.
- UDP-Multicast : Allows data communication to multiple clients causing no additional traffic to the network.
Multicast IP
Address
: User can directly input.
Multicast TTL
: Select from 0 ~ 255. Initial value for the TTL is set to <5>.
HTTP Port
: Enter the port number for the Web Viewer. Initially, it is set to <80>.
Multi Browser Support : The Web Viewer can be used with a browser that supports the Silverlight.
The multi viewer can be used only if the HTTP port is set to 80, protocol type is TCP and device ports range
within 4505-4530.
This is for the Siliverlight's security purposes.
Secure Video Transmission: Determine the network video transmission data is encrypted or not.
Encrypt: ON, Not Encrypt: OFF.
If you set the secure video transmission mode, the max bandwidth performance will be limited.
When ON is selected, multi browser is not supported.
4. When the protocol setup is done, press <OK>.
Device
Port,
UDP Port
and Unicast/Multicast are activated.
UDP-Unicast
and UDP-Multicast.
Connection Mode
Port
Interface
Protocol Type
TCP
Device Port
4520
~
4524
UDP Port
8000 ~ 8160
Unicast/Multicast
Unicast
Multicast IP
Address
224.126.63.1
Multicast TTL
5
HTTP
Port
80
Secure Video Transmission
ON
OFF
* Multi Browser Support:
Device Port 4505~4530, HTTP Port 80
OK
Cancel
English _61

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents