Samsung SDS-P3042 Quick Start Manual page 76

main menu
Connecting and Setting the Network
Networking may differ from the connection method, check your environment before setting the connection mode.
When no router is used
Static mode
- Internet connection : Static PPPoE, leased line, and LAN environments allows connection between the DVR
and remote user.
- DVR Network Settings : Set the <Connection Mode> in
<Interface> menu of the connected DVR to <Static>.

Consult your network manager for IP Address, Gateway and
Subnet Mask.
DHCP mode
- Internet connection : Connect the DVR directly to a cable
modem, DHCP PPPoE
- DVR Network Settings : Set the <Connection Mode> in
<Interface> menu of the connected DVR to <DHCP>.
PPPoE mode
- Internet connection : An
requires user ID and password.
- DVR Network Settings : Set the <Connection Mode> in
<Interface> menu of the connected DVR to <PPPoE>.

<ID> and <Password> should be the same to the
information.
If you don't know the ID and password, consult your
provider.
64_ main menu
modem or FTTH network.
PPPoE modem is directly connected to the DVR, where the
PPPoE
PPPoE
Connection Mode
Interface
Port
IP Type Static
Transfer Bandwidth 2Mbps
IP Address 192.168.1.200
Gateway 192.168.1.1
Subnet Mask 255.255.255.0
DNS Manual
OK
Connection Mode
Interface
Port
user
IP Type PPPoE
Transfer Bandwidth 600kbps
service
IP Address 192.168.1.200
Gateway 192.168.1.1
Subnet Mask 255.255.255.0
DNS Manual
ID ID
Password
************
OK
168.126.63.1
Cancel
PPPoE connection
168.126.63.1
Cancel