Connecting Web Viewer (Windows) - Samsung SDS-P3042 Quick Start Manual

web viewer

CONNECTING WEB VIEWER (Windows)

1. Open your web browser and type the IP address or URL of
DVR into the URL address box.

M
"192.168.1.200" is set to IP by default.

Set to an available IP address in "Network > Connection
Mode".

The URL connection will be enabled only when the DDNS connection settings have been completed.
2. A user with the admin permissions should provide the
admin ID and password. A registered user should provide
the user ID and password.

J
The default password can be exposed to a hacking thread so
it is recommended to change the password after installing the
product.

Set password for your wireless network if you use the product with a wireless router. Being not protected with
password or using the default wireless router password may expose your video data to potential threat.

Please change your password every three months to safely protect personal information and to prevent the damage
of the information theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a
password.

M
It allows up to 10 simultaneous access including the Admin and general users.

It does not allow multiple login of the Admin user.

Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.

Normal users should have set <Viewer> under <Permission Management> to "Use" before connecting to the
Web Viewer. (Page 35)

All settings are applied by the DVR's settings.

If you change such as the permission settings with logged in to the Web Viewer, you may go back to the log in
screen.
3. Click <Install ActiveX Control...>.
4. When the installation confirm message appear, click [Yes]
button.
82_ web viewer