Advertisement
Quick Links
Advertisement
Related Manuals for Samsung SDS-P4040
Summary of Contents for Samsung SDS-P4040
- Page 1 Samsung All-in-One CCTV (SDS-P3040, SDS-P4040) Remote Viewing Setup Guide...
- Page 2 DVR Network Setting Please follow the steps from Quick Start Guide included in the CCTV kits. This set up guide is only for remote viewing setting for DVR and ADSL or LTE Router ❒ ADSL or 3G/LTE Router (Gateway) IP check 1.
- Page 3 DVR Network Setting ❒ Connection Mode 1. Please make sure LAN cable is connected properly from DVR to WiFi router and internet is working. 2. Click on Network and select <Connection Mode>. 3. Select <Static IP> 4. Enter the <IP> The IP address consists of 4 fields, and the first 3 fields should be same to those of <Default Gateway>...
- Page 4 ※ If you already have other DVR or Webserver which is already using same <Webviewer Port> (80) or <TCP port> (4520 ~ 4524), the port need to be changed. In this case, please follow the steps from page 5 of “Router Setup Guide” which is included in the CD Rom from Samsung CCTV kit.
- Page 5 DVR Network Setting...
- Page 6 DVR Network Setting ❒ DVR DDNS Setting Go back to DVR 1. From network tab, click <DDNS> 2. Under DDNS Site, select <iPOLis> 3. Under <Product ID>, enter the Product ID which is registered at samsungipolis.com ※ Product ID should be pre registered at samsungipolis.com 8.
- Page 7 Remote Viewing Setting ❒ For Android Phone ❒ For iPhone ❒ Add Device for 3G/4G connection Name: Create a name for the DVR e.g.) Home_DDNS Model: Select DVR Address Type : Select DDNS Host : enter DDNS host address. It should be www.samsungipolis.com/Product ID ※...
- Page 8 Remote Viewing Setting ❒ Add Device for WiFi setting This setting is for when Smart Phone is connected to Telkom WiFi router Name: Create a name for the DVR e.g.) Home_IP Model: Select DVR Address Type : Select IP IP : Input 192.168.1.200 HTTP Port : Input 80 RSTP Port: Input 4524 ID : Input admin...
- Page 9 Remote Viewing Setting ❒ For PC connected to same router with DVR 1. Open Internet Explorer and go to http://192.168.1.200 2. You will be asked to install the active X plug-in for internet explorer. 3. Login with user ID and password for the DVR ❒...
-
Page 10: Router Setting
This below Port Forwarding is required for some of routers including Huawei LTE router. Below step is based on Huawei B594 LTE router. For other models, please follow the Port Forwarding setting guide from the “Router Guide” in the CD Rom inside of Samsung CCTV Kit. 1. Connect to http://192.168.1.1 using web... - Page 11 Distributed by Block 2│Thornhill Office Park│94 Bekker Rd│Midrand Postnet suite 1300│Private Bag X153│Bryanston 2021 T +27 10 003 7585│F +27 86 687 1231│www.3dr.co.za Manufactured by...