setup
USER TAB
You can add or delete a user, or change the ID or password.
M
If Auto Login (admin) is set, you can launch SmartViewer directly without providing the ID and password.
User List
To add a user
1. Click [Add User].
2. Enter your login ID.
You can enter up to 31 characters for the ID including
alphabets, numeric and '—'.
3. Enter the password.
Password can be made up of 8 – 31 digits excluding
spaces with a combination of English characters and
numbers.
4. Provide additional information such as the telephone
number or the address, according to the user.
5. To refine the user permissions, check the [Permission
Setup] checkbox and select desired options.
6. Click [OK].
The user will be added with the provided ID.
M
The "ADMIN" ID is the default ID that is created when the program is installed.
This ID cannot be removed. However, you can change the password.
48_ setup