Samsung SDS-P3042 Quick Start Manual page 222

Receive Events
Auto pop-up of the Receive Events window
You can select to create a popup window if there is an
incoming event.
If checked, the Receive Events window will pop up when an
event occur as shown in the figure to the right.
Motion Excluded
You can select to receive a motion event, one of the event
types.
Intelligent Video Analysis Excluded.
You can enable or disable notification on intelligent video
analysis events.
Audio Detection Excluded.
You can enable or disable notification on audio detection
events.
Event Sound
You can select an event sound to output if there is an incoming
event.
To change the sound, click [Set Path ( )].
The Open dialog appears when you can specify the path.
Play Sound
You can select to repeat the sound if an event is received.
If set to Continuous, the event sound will not be stopped until
you confirm the event.
Event Discard Time
This is a time of disregarding an event if the same event occurs. If the same type of event occurs from the same
camera within the specified time, the later event will be discarded.
English _45