Connecting with DVR
The following figures are based on Model SDR-5102.
Installing the camera
The camera can be installed on the wall, ceiling, shelf or a desired position using the provided bracket.
1. Select a position where you want to install the camera.
Make sure the selected position can sustain the weight of the camera.
2. Attach the camera bracket to the wall using the supplied
SDC-7340BC : M4 X L20
3. Adjust the camera to target the video location and tighten the camera bracket handle on the camera
bracket.
Handle
4. Connect the camera cable to the camera.
J
You should be careful when installing the camera outdoors because the cable connectors may be wet with moisture or pile
up with impurities.
The camera satisfies the IP66 standard, and direct exposure to water or moisture may cause problem such as
condensation.
IN 1
VI D EO
IN
IN 2
eS AT
A
LA N
VG A
IN 3
IN 4
AU DI
O IN
AU DI
O O UT
H D M
I
R S4
85
U SB
screws.
Handle
D C 12
V
M4 X L20
sized screws
English _17
wall or ceiling