Speakers
Description
Speakers (include left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
5.
Remove the battery (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Remove the two Phillips PM2.0×3.0 screws (2) that secure the speakers to the bottom cover.
3.
Lift the speakers from the computer (3).
Reverse this procedure to install the speakers.
Keyboard/top cover on page
Battery on page
33).
Spare part number
792784-001
23).
Component replacement procedures
35