Power Button Board - HP Stream Notebook PC 13 Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
Remove the power button board:
1. Position the keyboard/top cover upside down.
2. Remove the PM2.0×2.0 broad head screw (1) that secures the power button board to the keyboard/
top cover.
3. Lift the board to disengage it from the posts built into the top cover (2) and then remove the board (3).
Reverse this procedure to install the power button board.
28 Chapter 5 Removal and replacement procedures forAuthorized Service Provider parts
Keyboard/top cover on page
Spare part number
792777-001
23).