Installing Your Switch
Connecting to the Console Port
Page 42
The RJ-45 serial port on the front panel is used to connect to the switch for out-of-
band console configuration. The on-board configuration program can be accessed
from a terminal or a PC running a terminal emulation program.
The pin assignments used to connect to the serial port are provided in
Table 11: Serial Cable Wiring
RJ45
RTS
DTR
TXD
GND
GND
RXD
DSR
CTS
Pin
1
Used as defined. Should be connected
2
Not used. Should not be connected
3
Used as defined. Should be connected
4
Used as defined. Should be connected
5
Used as defined. Should be connected
6
Used as defined. Should be connected
7
Not used. Should not be connected
8
Used as defined. Should be connected
7210 SAS-D Installation Guide
Table
11.
Usage