Installing The Optional External Power Supply (Etr Only); Figure 20: Attaching The External Power To The Chassis Using The Mounting Kit (Front View) - Alcatel-Lucent 7210 SAS-D Installation Manual

Installing the Optional External Power Supply (ETR only)

Figure 20: Attaching the External Power to the Chassis Using the Mounting Kit (Front View)

7210 SAS-D Installation Guide
Make sure you have the following equipment available:
• 7210 SAS-D ETR chassis
• Optional external power supply
• Mounting kit for the external power supply, sold separately
• A screwdriver (Phillips or flathead, depending on the type of screws used)
To install your external power supply to the 7210 SAS-D ETR:
(Front view) Assemble and secure the brackets to the switch and the external
Step 1
power module using the screws provided in the External Power Supply
Mounting Kit. See Figure 20.
Installing the 7210 SAS-D
Page 43