Grounding The Chassis - Alcatel-Lucent 7210 SAS-D Installation Manual

Installing Your Switch

Grounding the Chassis

CAUTION
The earth connection must not be removed unless all supply connections have been disconnected.
Page 36
Before powering on the switch, ground the switch to earth as described below.
Ensure that the rack on which the switch is to be mounted is properly
Step 1
grounded.
Step 2 Ensure that you have made a suitable electrical connection to the grounding
point on the rack. Ensure that no paint or isolating surface treatment is present
on the grounding point.
Step 3 Disconnect all power cables to the switch.
Step 4 Ground per local electrical codes.
Step 5 Attach the grounding wire to the ground points on the rack.
7210SASac_0001
7210 SAS-D Installation Guide
1