Console Port Pin Assignment; Table 16: Serial Cable Wiring - Alcatel-Lucent 7210 SAS-D Installation Manual

Console Port Pin Assignment

Console Port Pin Assignment
Page 86
The RJ-45 serial port on the front panel is used to connect to the switch for out-of-
band console configuration. The on-board configuration program can be accessed
from a terminal or a PC running a terminal emulation program.
The pin assignments used to connect to the serial port are provided in

Table 16: Serial Cable Wiring

RJ45
RTS
NC
TXD
GND
GND
RXD
NC
CTS
Pin
1 Used as defined. Should be connected
2 Not used. Should not be connected
3 Used as defined. Should be connected
4 Used as defined. Should be connected
5 Used as defined. Should be connected
6 Used as defined. Should be connected
7 Not used. Should not be connected
8 Used as defined. Should be connected
7210 SAS-D Installation Guide
Table 16.
Usage