Console Port - Alcatel-Lucent OmniSwitch 6450-P10S Hardware User's Manual

Console Port

Console Port
The console port, located on the chassis front panel, provides a console connection to the switch and is
required when logging into the switch for the first time. By default, this RJ-45 connector provides a DTE
console connection.
Serial Connection Default Settings
The factory default settings for the serial connection are as follows:
baud rate
parity
data bits (word size)
stop bits
flow control
page 2-46
OmniSwitch 6450 Chassis and Hardware Components
9600
none
8
1
none
OmniSwitch 6450 Hardware Users Guide January 2015