Power Switch; Table 9: 100/1000 Fiber-Optic Sfp And 10/100/1000Base-T Copper Port Leds; Table 10: Front Panel Power Switch; Figure 13: Location Of The Power Switch - Alcatel-Lucent 7210 SAS-D Installation Manual

Table 9: 100/1000 Fiber-Optic SFP and 10/100/1000Base-T Copper Port LEDs

1/1/1 – 1/1/6 – SFP ports and
1/1/7 – 1/1/10 – Fixed
Copper ports

Power Switch

See Figure 13 on page 27

Table 10: Front Panel Power Switch

Button/Switch
Power Module Switch
7210 SAS-D Installation Guide
LED
Green
Flashing Green
Off
for the location of the power switch and

Figure 13: Location of the Power Switch

Condition
0
1
Condition
Port has a valid link.
Flashing indicates activity on the port.
The link is down.
Standby mode if switch is connected to a power source.
AC or DC power is applied to the switch.
7210 SAS-D Overview
Status
Table 10 for key descriptions.
1
7210SASac_0001
Status
Page 27