Alcatel-Lucent 7210 SAS-D Installation Manual page 59

7210 SAS-D Installation Guide
You will need the following:
• A FTP server
• TiMOS image
• A PC with a serial port and Hyperterminal
• Cable that connects the console port of SAS-D to the serial port of PC
• A network cable to connect the 7210 unit to the network
Prepare the set up as shown in the diagram above.
When you are done, power on the 7210 SAS-D.
Using the uplink port to boot 7210 from the network:
Resetting...OK
Alcatel-Lucent 7210 Boot ROM. Copyright 2009-2011 Alcatel-Lucent.
All rights reserved. All use is subject to applicable license agreements.
Testing ROM load area...done
Relocating code...Jumping to RAM
Performing second stage RAM test....passed
Board Serial Number is 'NS1111C0115'
Bootlog started for Version A-V-3.0.B5-85
Build V-3.0.B5-85 bootrom/mpc 7xxx
Built on Wed Apr 20 13:52:05 IST 2011 by builder in /builder/3.0B5/panos/
main
?Attempting to load from file cf1:/boot.tim
Version L-3.0.B5-85, Wed Apr 20 14:13:38 IST 2011 by builder in /builder/
3.0B5/panos/main
text:(4782384-->20108848) + data:(1084015-->3891872)
Starting at 0xb000000...
PCIe: Port 0 Link UP
Total Memory: 512MB
TiMOS-L-3.0.B5-85 boot/mpc ALCATEL SAS-D 6F4T 7210 Copyright (c) 2000-2011
Alcatel-Lucent.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Apr 20 14:13:38 IST 2011 by builder in /builder/3.0B5/panos/
main
Chassis Type: sas Card Type: badami_7210
Configuring the 7210 SAS-D
Page 59