Wall Mounting; Figure 17: Wall Mounting The Chassis Using The Wall Mounting Screws - Alcatel-Lucent 7210 SAS-D Installation Manual

Wall Mounting

Figure 17: Wall Mounting the Chassis using the Wall Mounting Screws

Note: For wall mounting the standard max ambient temperature is limited to 35 deg C and the
ETR max temperature is limited to 55 deg C. Wall mounting is not supported when using the
external power supply.
7210 SAS-D Installation Guide
Step 1 Measure the distance between the two wall mounting screw guides located on
the bottom of the chassis.
Secure the two wall mounting screws to the desired location on the wall. See
Step 2
Figure 16.
2
4
Step 3 Secure the chassis to the wall by hooking the two wall mounting screws into
the wall mounting screw guides on the bottom of the chassis.
3
2
Installing the 7210 SAS-D
1
7210SASdc_0007
Page 35