Grounding The Chassis - Alcatel-Lucent OmniSwitch 10K User Manual

Grounding the Chassis

Grounding the Chassis
The switch has two threaded holes for grounding screws located on the rear of the chassis. These holes use
10-32 screws and are surrounded by a small paint-free rectangular area, which provides metal-to-metal
contact for a ground connection.
Use this connector to supplement the ground provided by the AC power cord. To do so, install a Panduit
Grounding Lug (type LCD8-10A-L) using 8AWG copper conductors to the paint-free rectangular area.
Refer to the rear chassis view on
page 2-24
page 2-2 for location details.
OmniSwitch 10K Hardware Users Guide
Chassis and Power Supplies
August 2015