Grounding The Chassis - Alcatel-Lucent OmniSwitch 6900 Hardware User's Manual

Chassis and Power Supplies

Grounding the Chassis

The switch has a grounding lug located on the rear of the chassis. This lug uses 10-32 screws and is
surrounded by a small paint-free area, which provides metal-to-metal contact for a ground connection.
Use this connector to supplement the ground provided by the AC power cord. To do so, install a Panduit
Grounding Lug (type LCD8-10A-L) using 8AWG copper conductors to the paint-free area.
Refer to the rear chassis views on
OmniSwitch 6900 Hardware Users Guide
page 2-2 for location details.
February 2012
Grounding the Chassis
page 2-31