Failsafe Output Wiring And Specifications - RuggedCom RuggedSwitch RS900G Installation Manual

10-port managed ethernet switch with gigabit uplink ports

Hide thumbs Also See for RuggedSwitch RS900G:

Table of Contents

2.4 Failsafe Output Wiring and Specifications

The "Failsafe" output relay is provided to signal critical error conditions that may occur on the

RS900G series switch. The contacts are energized upon power up of the unit and remain

energized until an alarm condition or power loss occurs.

Figure 2.4.1 RS900G Family Failsafe Output Relay



Rev105

Table of Contents

Do you have a question about the RuggedSwitch RS900G and is the answer not in the manual?