Table of Contents
Advertisement
2.4 Failsafe Output Wiring and Specifications
The "Failsafe" output relay is provided to signal critical error conditions that may occur on the
RS500. The contacts are energized upon power up of the unit and remain energized until a critical
error occurs.
RS500 Failsafe Relay Outputs
Normally Closed
Common
Normally Open
*** Normal contact state prior to power being applied to unit. ***
11
©
2008 RuggedCom Inc. All rights reserved
Rev101
Advertisement
Table of Contents
Need help?
Do you have a question about the RuggedSwitch RS500 and is the answer not in the manual?
Questions and answers