5
Press
6
Press
Unexpected page breaks occur
1
Make sure the printer is on and Select Function appears.
2
From the printer control panel, press System.
3
Press
or
4
Press
or
5
Press
or
6
Press
or
7
Press
or
8
Press
or
9
Press
repeatedly until Select Function appears.
Solving copy problems
Copier does not respond
These are possible solutions. Try one or more of the following:
A
RE THERE ANY ERROR MESSAGES ON THE DISPLAY
Clear any error messages.
C
HECK THE POWER
Make sure the printer is plugged in, the power is on, and Select Function appears.
Scanner unit does not close
Make sure there are no obstructions:
1
Lift the scanner unit.
2
Remove any obstruction keeping the scanner unit open.
3
Lower the scanner unit.
Poor copy quality
These are some examples of poor copy quality:
•
Blank pages
•
Checkerboard pattern
•
Distorted graphics or pictures
Downloaded From ManualsPrinter.com Manuals
or
repeatedly until Nearest Size appears, and then press OK.
repeatedly until Select Function appears.
repeatedly until Admin Menu appears, and then press OK.
repeatedly until System Settings appears, and then press OK.
repeatedly until Time-Out appears, and then press OK.
repeatedly until On appears, and then press OK.
repeatedly to adjust the time, or use the keypad to enter a value, and then press OK.
repeatedly to adjust the time, or use the keypad to enter a value, and then press OK.
?
Troubleshooting
175