Sending A Broadcast Fax; Inserting A Pause In A Fax Number - Lexmark X560n User Manual

5
Press Start
After the page is scanned, Another Page? appears. Press
press OK.
6
If you want to send a single page, select No, and then press
7
If you want to send more than one page, select Yes. Place Next Page appears. Place the next page facedown
on the scanner glass. Press
8
Repeat step 7 for all necessary pages. When finished, choose No, and then press
Function appears.

Sending a broadcast fax

You can send the same fax to more than one fax number. You can include Address Book numbers, Group Dial numbers,
and one manually dialed number in the same broadcast.
1
Make sure the printer is on and is connected to a working phone line.
2
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
3
If you are loading a document into the ADF, adjust the paper guides.
4
From the printer control panel, press Fax.
5
Press or
6
Press or
7
Repeat step 6 to add additional recipients.
8
Press Start

Inserting a pause in a fax number

Some fax numbers require one or more pauses during the dialing sequence.
1
Make sure the printer is on and is connected to a working phone line.
2
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
3
If you are loading a document into the ADF, adjust the paper guides.
4
From the printer control panel, press Fax.
5
Press or
6
Press or
Downloaded From ManualsPrinter.com Manuals
to start the fax job.
or repeatedly to select Continue, and then press OK.
repeatedly until Fax to appears, and then press OK.
repeatedly to choose the type of recipient, and then press OK.
to start the fax job.
repeatedly until Fax to appears, and then press OK.
repeatedly until Fax Number appears, and then press OK.
or repeatedly to select No or Yes, and then
repeatedly until Select Function appears.
Faxing
87
repeatedly until Select