Adjusting The Color Saturation Of A Copy; Adjusting The Auto Exposure Of Copies - Lexmark X560n User Manual

5
To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
6
Press or
7
Press or
8
Press Start

Adjusting the color saturation of a copy

To darken or lighten the overall color levels of your copies:
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper guides.
3
From the printer control panel, press Copy.
4
Use the keypad to enter the number of copies.
5
To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
6
Press or
7
Press or
8
Press Start

Adjusting the auto exposure of copies

Papers that are off-white or ivory colored, such as newsprint, can cause the printer to put toner on the page so that
the printed output has a background that matches the original. The Auto Exposure setting removes the light or close
to white color and only the image itself is printed. To adjust the default auto exposure setting:
1
From the printer control panel, press System.
2
Press or
3
Press or
4
Press or
5
Press or
6
Press repeatedly until Select Function appears.
Downloaded From ManualsPrinter.com Manuals
repeatedly until Sharpness appears, and then press OK.
repeatedly until Sharper, Normal, or Softer appears, and then press OK.
to begin copying.
repeatedly until Color Saturation appears, and then press OK.
repeatedly until Higher, Normal, or Lower appears, and then press OK.
to begin copying.
repeatedly until Default Settings appears, and then press OK.
repeatedly until Copy Defaults appears, and then press OK.
repeatedly until Auto Expo. Level appears, and then press OK.
repeatedly until Normal, Higher(1), or Higher(2) appears, and then press OK.
Copying
66