Lexmark X560n User Manual page 153

Load Tray <x>
Load the specified tray with the correct paper type and size.
Login Error
Error 016-782
Press OK
The printer failed to log in to the server (SMTP/SMB/FTP). Check that the printer is physically connected to the network,
verify that the user name and password settings are correct, and then press OK to continue.
MCU Firmware Error
Error 024-340
Error Code:xx
Restart Printer
A firmware error has occurred.
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Check all cable connections.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
If the service message appears again, contact Customer Support, and report the message.
MCU NVRAM Error
Error 041-340
Address: <xxxx> Data: <xx>
Restart Printer
An NVRAM error has occurred.
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Check all cable connections.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
If the service message appears again, contact Customer Support, and report the message.
Network Scan Error, Connection Timeout
Press OK
Downloaded From ManualsPrinter.com Manuals
Understanding printer messages
153