Setting The Copy Margins; Canceling A Copy Job - Lexmark X560n User Manual

Setting the copy margins

Note: The ADF cannot be used for this feature.
1
From the printer control panel, press System.
2
Press or
3
Press or
4
Press or
5
Press or
6
Press or
7
Repeat the steps for other margins, and then press
8
Load an original document facedown on the scanner glass.
9
From the printer control panel, press Copy.
10
Use the keypad to enter the number of copies.
11
To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
12
Press or
13
Press or
14
Press Start

Canceling a copy job

To cancel a print job, press Stop
Note: If the copy job continues to print, part of the job may have already been transmitted to the printer buffer before
the stop command was sent. Canceling appears on the display, and the remaining buffered pages are printed
before the job is canceled.
Downloaded From ManualsPrinter.com Manuals
repeatedly until Default Settings appears, and then press OK.
repeatedly until Copy Defaults appears, and then press OK.
repeatedly until Margin Width appears, and then press OK.
repeatedly to select the margin you would like to change, and then press OK.
repeatedly to adjust the margin, and then press OK.
repeatedly until Margin appears, and then press OK.
repeatedly until On appears, and then press OK.
to begin copying.
at any time.
repeatedly until Select Function appears.
Copying
69