Lexmark X560n User Manual page 156

The internal temperature of the printer is too high. Wait one hour before restarting the printer. Ensure that the printer
has adequate cooling space around it, and that the cooling vents are not blocked.
RAM Error
Error 016-3xx
Restart Printer
Additional memory is not installed correctly, not working correctly, or not supported.
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Reinstall the optional memory.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
If the message appears again, replace the specified additional memory.
Remove Tape, <color> Cartridge
The sealing tape is still attached to the specified print cartridge. Remove the sealing tape from the specified print
cartridge.
Replace <color> Print Cartridge
Empty <color>
Print Cartridge
The specified print cartridge is empty. Remove the specified print cartridge, and then install a new one.
Replace <color> Print Cartridge Soon
The specified print cartridge will soon be exhausted.
When Replace <color> Print Cartridge Soon appears or when the print becomes faded, you may be
able to extend the life of the print cartridge:
1
Remove the specified print cartridge.
2
Firmly shake the cartridge side-to-side and front-to-back several times to redistribute toner.
3
Reinsert the print cartridge and continue printing.
Replace Fuser Soon
The fuser life is nearly exhausted. Order a new fuser.
Replace Transfer Unit
Replace the transfer belt.
Downloaded From ManualsPrinter.com Manuals
Understanding printer messages
156