Canceling A Fax Job; Receiving A Fax; Understanding The Fax Receive Modes; Setting The Fax Receive Mode - Lexmark X560n User Manual

Canceling a fax job

To cancel a print job, press Stop

Receiving a fax

Understanding the fax receive modes

Fax receive mode
TEL Mode
FAX Mode
TEL/FAX Mode
Ans/FAX Mode
DRPD Mode

Setting the fax receive mode

1
Make sure the printer is on and Select Function appears.
2
From the printer control panel, press System.
3
Press or
4
Press or
5
Press or
6
Press or
7
Press repeatedly until Select Function appears.
Downloaded From ManualsPrinter.com Manuals
at any time.
Description
Automatic fax reception is turned off. You can receive a fax by picking up
the handset of the external phone and then pressing the remote receive
code, or by setting On Hook to On (so you can hear voice or fax tones from
the remote machine) and then pressing Start.
A fax is automatically received.
When the printer receives an incoming fax, the external telephone rings for
the time specified by Auto Ans. TEL/FAX, and then the printer automatically
receives the fax. If incoming data is not a fax, the printer sounds a beep over
the internal speaker.
The printer can share one telephone line with an answering machine. In this
mode, the printer monitors the fax signal and picks up the line if there are
fax tones. If the phone communication in your country or region is serial,
this mode is not available.
Before using the Distinctive Ring Pattern Detection (DRPD) option,
distinctive ring service must be installed on your telephone line by the
telephone company. After the telephone company has provided a separate
number for faxing with a distinctive ring pattern, configure the fax setup to
monitor for that specific ring pattern.
repeatedly until Admin Menu appears, and then press OK.
repeatedly until Fax Settings appears, and then press OK.
repeatedly until Ans Select appears, and then press OK.
repeatedly to select the fax mode you want, and then press OK.
Faxing
91