Configuring Ethernet Settings - Canon LBP6230dw Manual

Configuring Ethernet Settings

Ethernet is a standard for communicating data in a LAN. You can set the communication mode (Half Duplex/Full Duplex) and the
Ethernet type (10BASE-T/100BASE-TX). The factory default setting, the communication mode and type of Ethernet are automatically
detected. Usually, the Ethernet settings can be used as is, but use the following procedure to manually specify the settings as necessary.
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Network Settings]
4
Click [Edit].
5
Clear the [Auto Detect] check box, and then configure the Ethernet settings.
Downloaded from ManualsPrinter.com Manuals
[Ethernet Driver Settings].
Starting the Remote UI
0JFC-053