1
Select the [Use Filter] check box, and then select a policy with [Default Policy].
[Use Filter]
Select the check box to restrict communication. Clear the check box to communicate without restrictions.
[Default Policy]
As the policy conditions, select whether to allow or reject other devices to communicate with the machine.
[Reject]
[Allow]
2
Specify address exceptions.
Enter a MAC address in the [Address to Register] text box and click [Add].
When entering the address, do not delimit it with hyphens or colons.
When [Reject] is selected for an outbound filter
Outgoing multicast and broadcast packets cannot be filtered.
To delete a MAC address that has been set
Select the MAC address to delete, and then click [Delete].
3
Click [OK].
6
Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
LINKS
Specifying IP Addresses for Firewall Rules
Downloaded from ManualsPrinter.com Manuals
Select this to communication only when the data is sent to or received from devices whose MAC
addresses are entered in [Exception Addresses]. Communication with other devices is prohibited.
Select this to data that is sent to or received from devices whose MAC addresses are entered in
[Exception Addresses]. Communication with other devices is allowed.